Loops and Bends

Double Fisherman's Knot: How to Tie a Strong Rope Bend

Tie a double fisherman's knot step by step, leave the right tails, and learn why it can jam hard under load and how to choose a different bend.

On this page
  1. What it is
  2. How to tie it
  3. Leave long tails
  4. Jamming and welding
  5. Triple fisherman’s for slick rope
  6. Safety and limits
  7. Related knots

What it is

The double fisherman’s knot is a bend that joins two ropes of similar size. You can also use it to close a loop of cord, such as a prusik loop. It is made of two double overhand knots, each tied around the other rope’s standing part. The two pull together to lock.

How to tie it

  1. Lay the ends side by side. Point the two ends in opposite directions, with a long overlap.
  2. Tie the first knot. Wrap one end around the other rope’s standing part two full times. Pass the end back through the wraps, and pull it snug.
  3. Tie the second knot. Do the same with the other end. Wrap it around the first rope’s standing part two full times, and pass it back through its wraps.
  4. Slide the knots together. Pull the two standing parts in opposite directions until the two knots sit flush against each other.
  5. Dress and set. Check that neither knot is crossed or twisted. Pull firmly on both ropes to set the knot.

Leave long tails

The knot can slip a little before it sets, and it jams under load. Leave long tails on both ends. Many guides suggest a tail of about 10 times the rope’s diameter as a minimum. Check the standard that your course or gear guide uses.

Jamming and welding

Under heavy or sudden loads, the knot can jam so hard that it is very difficult to untie. A jammed knot may need to be cut away. If you expect to untie the join later, consider a different bend. The Zeppelin bend is often described as easier to untie.

Triple fisherman’s for slick rope

For slick, high-stretch ropes such as Dyneema or Spectra, many guides suggest a triple fisherman’s. It adds a third wrap in each half of the knot.

Safety and limits

  • For climbing, rescue, or any life-safety use, learn the knot from a qualified instructor.
  • Check the tails and the shape of the knot before each use, and inspect both ropes for damage.
  • The knot can be tied wrongly and still look close to right. Have a partner check it.
  • The sheet bend joins two ropes of different thickness.
  • The water knot joins flat webbing and straps.
  • Loop knots covers loops, including closed cord loops.

The complete guide to loops and bends

Loop Knots: How to Tie Secure Loops for Climbing and Boating
Read the guide

Keep exploring

Guides from other topics

All topics →