What the sheet bend is for
The sheet bend joins two ropes, and it works well when the ropes are different thicknesses. It is quick to tie and usually easy to untie after it has been loaded. People learn it for camping, boating, and scouting.
It is a bend, which means it joins two ropes. It does not make a loop. For loops, see loop knots.
How to tie a sheet bend
Use the thicker rope to form the bight. The thinner rope does the wrapping.
- Make a bight in the thicker rope. Fold the rope into a U-shape. The bight is the part that holds the knot.
- Pass the thinner rope up through the bight. Bring its end up from underneath, through the U.
- Take the thinner rope around the bight. Carry the end around the back of both legs of the U.
- Tuck the end under its own standing part. Pass it under the thinner rope where it first came up through the bight, so the end locks.
- Pull tight and dress the knot. Pull both standing parts to set the knot. Make sure the turns lie flat and do not cross.
Double sheet bend
For more security, wrap the thinner rope around the bight a second time before the final tuck. This is often used when the ropes are slippery or when extra security is wanted. A double sheet bend adds turns, but it does not turn the join into a rated connection.
When a sheet bend can slip
- With no steady tension. A sheet bend can work loose when it is unloaded or lightly loaded. After you tie it, pull on both ropes, and check the knot again after the first loads.
- With slippery rope. Some slick synthetic lines may slide through a sheet bend. A double sheet bend or a different knot may suit them better.
- With changing loads. Repeated loading can change the knot’s shape, so check it before each use.
Common uses
- Joining a thin cord to a thicker line. Fishing line of unequal diameter is a different job, with its own joining knots.
- Tying the meshes of a net, where it is known as the netting knot. See net making.
- Tying guy lines or ties to a tarp.
- Joining two lines for a short time on a boat or at camp.
Safety and limits
- A sheet bend is weaker than the rope it joins. For more on how much, see how strong a sheet bend knot is.
- For loads where failure could hurt someone, such as climbing, rescue, or lifting, use a knot that is rated and taught for that job. Learn it from a qualified instructor.
- Check the knot before every use.
Related knots
- The double fisherman’s knot joins two ropes of similar size and holds well, but it can jam so hard that it is hard to untie.
- The water knot joins flat webbing and straps rather than round rope.