Loops and Bends

Alpine Butterfly Knot: How to Tie It and Its Uses

See what the alpine butterfly knot is used for, from mid-rope attachments to rigging, plus its strengths, its limits, and when to choose another loop.

On this page
  1. What the alpine butterfly is
  2. Common uses
  3. Why people use it
  4. How it is tied
  5. Limits and safety
  6. Related knots

What the alpine butterfly is

The alpine butterfly is a fixed loop tied in the middle of a rope. You do not need either end of the rope to tie it, so it is useful when both ends are already fixed or out of reach. It is also called the butterfly loop.

The finished knot has a central loop and a cross pattern on each side. That symmetric shape makes it easier to check than many loops.

Common uses

Mid-rope attachment

A fixed loop in the middle of a line gives you a point to clip into or hang from. Mountaineers have used it to attach a person part-way along a rope, such as during glacier travel. It can also serve as a point for a carabiner or a pulley.

Rigging and hauling

On a job site or at camp, a mid-line loop can serve as a point for a hauling line or a tie-off along a line that is already under tension.

Keeping a damaged section out of the load

Some guides suggest tying the loop so that a frayed or worn section sits inside it, away from the load path. This can help you finish a job with the rope, but it does not repair the rope. Retire rope that is cut, burned, chemically damaged, or badly worn.

Why people use it

  • It can take load from more than one direction. It is often described as loading well from more than one direction, which is one reason it suits mid-line use.
  • It is usually easy to untie. Many users report that flexing the knot loosens it, even after a heavy load.
  • It is easy to check. The symmetric shape and cross pattern make it easier to see whether it is tied correctly, including when you are wearing gloves.

How it is tied

The alpine butterfly has several tying methods, and they use different numbers of wraps. A common hand-wrap method wraps the rope around one hand to form the loops, then passes a bight around the other strands before the knot is cinched.

Pick one method, follow one clear diagram from start to finish, and do not mix steps from two methods. Practice with spare rope, and compare the finished knot with the diagram before you rely on it. If you can, learn the wraps from an instructor.

Limits and safety

  • Learn it before you use it for loads. Climbing, rescue, and rigging loads need training from a qualified instructor, not just a written guide.
  • Any knot weakens rope. Tying a loop in the middle of a rope reduces the rope’s strength at that point.
  • Check it every time. Look for symmetry, no twists, and a neat, set knot before you load it.

The complete guide to loops and bends

Loop Knots: How to Tie Secure Loops for Climbing and Boating
Read the guide

Keep exploring

Guides from other topics

All topics →