Loops and Bends

How to Tie a Bowline: The Rabbit Hole Method and Eskimo Bowline

Tie a bowline step by step with the rabbit hole method, check the knot before you use it, and learn how the Eskimo bowline differs from it.

On this page
  1. What the bowline is for
  2. The rabbit hole method
  3. Check the knot
  4. Common mistakes
  5. The Eskimo bowline
  6. Safety and limits
  7. Related knots

What the bowline is for

The bowline makes a fixed loop at the end of a rope. Under load the loop keeps its size, and the knot is often easy to untie afterward. That is why it is widely used on boats, around camp, and in climbing and rescue training.

Learn it from hands-on practice, not from a summary alone. Tie it several times with a spare rope before you rely on it.

The rabbit hole method

The rabbit hole is a memory story for the steps. Each part of the knot has a name in the story:

  • The hole: a small loop made in the rope.
  • The rabbit: the working end, the free end of the rope.
  • The tree: the standing part, the long part of the rope that carries the load.

Steps

  1. Make the hole. Form a small loop in the rope, the hole, with the standing part running through it.
  2. The rabbit comes out of the hole. Pass the working end up through the hole from underneath.
  3. The rabbit goes around the tree. Take the working end around the back of the standing part.
  4. The rabbit goes back down the hole. Pass the working end back down through the original loop.
  5. Set the knot. Hold the loop and the working end, then pull on the standing part to snug the knot.

Keep the loop fixed as you set it. If the loop shrinks or slides, the knot is not dressed correctly.

Check the knot

  • The loop should not slide when you pull on the standing part.
  • The working end should leave the loop neatly, with no twists.
  • Leave a tail. Many guides suggest a visible tail, and a longer one is safer for loaded use.
  • Compare the finished knot with a clear diagram. If it looks different from the diagram, untie it and start again.

Common mistakes

  • The rabbit goes around the wrong side of the tree. The result is a different knot that may loosen or capsize under load. Check the path against a diagram.
  • Skipping the set. A knot that has not been snugged can work loose.
  • A short tail. Short tails leave little margin if the knot shifts.

The Eskimo bowline

The Eskimo bowline is a related knot, but it is not just a bowline with a different name. It is tied with a different structure and is often used for loops that go around a person’s body. Because its steps differ from the standard bowline, learn it from a clear diagram or a qualified instructor, and check the finished knot against a reference before use.

Safety and limits

  • A bowline can loosen or capsize, especially with shock loads or side loads. Inspect it before each use.
  • Many climbing instructors recommend a backup knot, or a different tie-in knot. Climbers disagree about which bowline variant is best. For comparison, see the Yosemite bowline and the figure eight follow-through.
  • For any life-safety use, learn the knot with an instructor and have a partner check it.
  • The bowline on a bight makes two fixed loops in one rope.
  • The rabbit hole explainer covers the memory story in more detail, and also explains the unrelated idiom.

The complete guide to loops and bends

Loop Knots: How to Tie Secure Loops for Climbing and Boating
Read the guide

Keep exploring

Guides from other topics

All topics →