Loops and Bends

What is a loop knot used for?

Loop knots attach rope to anchors, hooks, lures, and gear. Learn the three main loop types, where each one fits, and how to choose a loop for your job.

On this page
  1. The short answer
  2. The three main loop types
  3. Common uses
  4. How to choose a loop
  5. Safety and limits
  6. Related knots

The short answer

A loop knot ties a loop into the end or the middle of a rope, so that something can be attached to it. Common jobs include attaching to an anchor, post, or ring; hanging or hauling gear; fishing with a lure or fly; and tying in for climbing, which requires training.

The three main loop types

Type What it does Examples
Fixed loop Keeps its size and does not slide Bowline, alpine butterfly, figure eight loop
Running loop Slides along the rope to tighten or adjust Slipknot, running bowline
Non-slip loop Stays at the set size and lets a lure or fly move freely Non-slip loop for fishing

Common uses

Boating and docks

A fixed loop holds its size around a post or ring, which is one reason bowlines are common on boats for mooring lines.

Camping and hanging gear

A loop at the end of a line can go over a tent peg or stake. A loop in the middle of a line can serve as a hanging point.

Fishing

A non-slip loop lets a lure or fly move freely in the water. For steps, see how to tie a loop knot that won’t slip. Anglers also use the uni loop and the perfection loop.

Climbing and rescue

Loops are used as tie-in and anchor points, and these uses carry life-safety risk. Learn them from a qualified instructor, and check each knot before every use. For a tie-in example, see the figure eight follow-through.

How to choose a loop

  • Will it carry a load that matters? Use a fixed loop that you have learned well, and check it before use.
  • Does the loop need to change size? Only a running loop does that. Do not use a running loop where it must hold.
  • Where do you need the loop? At the end of a rope, a bowline is a common choice. In the middle, an alpine butterfly knot is one option.
  • Will you need to untie it later? Some loops are easier to untie after loading than others. Practice untying the knot after a light load before you rely on it.

Safety and limits

  • A loop can loosen, capsize, or weaken if it is tied wrong. Check it before every use.
  • Use loops for life-safety work only after training.
  • A loop that is not dressed and set can change shape under load.

The complete guide to loops and bends

Loop Knots: How to Tie Secure Loops for Climbing and Boating
Read the guide

Keep exploring

Guides from other topics

All topics →