Knot Basics

Types of Knots: A Visual Reference to Common Knots and Their Uses

A reference to common knots grouped by family (stopper, loop, hitch, bend), with typical uses, safety notes for trade knots, and tips for identifying one.

On this page
  1. The four families
  2. Reference table
  3. Stopper knots
  4. Loop knots
  5. Hitches
  6. Bends
  7. Trade and rigging knots
  8. How to identify an unknown knot
  9. Frequently asked questions

There are hundreds of named knots, but most of them belong to a few families. Knowing the family tells you what a knot is for, and that is usually more useful than memorizing names. This reference groups common knots by family, lists what each one is typically used for, and explains how to identify a knot you do not recognize.

The four families

Rope knots fall into four main families based on what they do:

  • Stopper knots keep the end of a rope from slipping through a hole, block, or grommet.
  • Loop knots create a fixed loop that does not slide or shrink.
  • Hitches attach a rope to an object, such as a post, ring, or another rope. A hitch relies on that object to hold its shape.
  • Bends join two ropes together.

Two other groups are worth knowing. Binding knots constrict an object or hold two things together. Decorative knots are tied mainly for appearance, although many of them also have practical uses.

Reference table

Knot Family Typical use
Overhand Stopper Keeps a rope end from slipping through a hole
Figure-eight Stopper Bulkier stopper that is easier to inspect and untie after a load
Bowline Loop Fixed loop at the end of a rope that is easy to untie after a load
Figure-eight on a bight Loop Strong fixed loop, often used in climbing and rescue
Alpine butterfly Loop Fixed loop in the middle of a rope that can take a load from more than one direction
Clove hitch Hitch Quick tie-off to a post, rail, or spar
Two half hitches Hitch Tie-off to a ring, post, or tree
Taut-line hitch Hitch Adjustable tension on a tent or tarp guy line
Trucker’s hitch Hitch Tightening a load with a pulley-like advantage
Rolling hitch Hitch Attaching a line to a pole or to another rope under tension
Prusik Hitch (friction) Grips a rope under load and slides when unloaded; used in climbing and rescue
Sheet bend Bend Joins two ropes of different thickness
Square knot Bend Joins two ropes of equal thickness for light tasks
Double fisherman’s Bend Joins two smooth or stiff lines; very secure, but hard to untie after loading
Constrictor Binding Binds an object tightly; hard to undo once loaded
Turk’s head Decorative Ornamental knot, often tied in a ring or sleeve

A few notes on the table. The trucker’s hitch is described as giving about 3 to 1 mechanical advantage on paper, but friction on the rope reduces that. Friction hitches like the prusik are used in climbing and rescue, where they need training to use safely.

Stopper knots

The overhand is the simplest stopper and the one most people learn first. The figure-eight is bulkier, holds its shape well, and is easier to inspect. Use a stopper at the end of a line that might otherwise slip through a block, a fairlead, or a hole. For how to tie the overhand, see the overhand knot guide.

Loop knots

The bowline is the loop most people need. It forms a fixed loop at the end of a rope and can be untied even after it has carried a heavy load. The figure-eight on a bight forms a strong loop in the middle of a rope. The alpine butterfly forms a fixed loop in the middle of a rope and is used when the load may come from different directions.

Hitches

Clove hitches and two half hitches are the core tie-offs. Use a clove hitch for a quick attachment, and two half hitches when the attachment needs to hold. The taut-line hitch is the usual choice for guy lines because you can slide it to adjust tension. The trucker’s hitch is used for cinching down loads, and the rolling hitch attaches a line to another rope or pole under tension. The half hitch guide explains why a single half hitch is not enough on its own.

Bends

Use a sheet bend to join two ropes of different thickness. The square knot works for two ropes of equal thickness in light tasks, but it should not be used to join load-bearing lines because it can slip or spill. The double fisherman’s knot is very secure for joining two smooth or stiff lines, but it can be difficult to untie after it has been loaded.

Trade and rigging knots

Lineman-style and rigging knots, such as the munter hitch, the timber hitch, and the rider knot (a name used for the alpine butterfly in line work), are used by trained crews with rated equipment. Do not learn them from a reference table. Take a course from a qualified instructor, and treat any knot that supports a person or a heavy load as a skill to be checked, not assumed.

How to identify an unknown knot

Work through three steps:

  1. Find the family. Does it create a loop, stop an end, attach to an object, or join two ropes?
  2. Trace the path. Spread the knot flat and follow the rope from one end to the other. Count where the rope crosses over itself.
  3. Compare. Check the knot against an illustrated reference or a knot identifier, and look at its family and crossings to narrow the search.

If you can describe what the rope is attached to, and what the knot needs to do, you can usually find the right family and a short list of candidates.

Frequently asked questions

What is the difference between a hitch and a bend?

A hitch attaches a rope to an object or to another rope, and it depends on that object to keep its shape. A bend joins two rope ends together, so the knot holds on its own. If you are unsure, ask what the knot is holding onto.

Do I need to know 30 knots?

No. Most people do well with the eight knots in our best knots to learn guide. Learn the families first, and add specialized knots as the job calls for them.

The complete guide to knot basics

Best Knots to Learn: A Beginner's Guide to Knot Tying
Read the guide

Keep exploring

Guides from other topics

All topics →