A rolling hitch grips a rope or pole and holds under a steady pull, as long as the pull runs in line with the rope it grips. It is useful for attaching a smaller line to a larger one, for a spring line on a boat and for a clothesline at home. It holds best on line with some grip. It can slip on modern slippery rope, so do not rely on one for a critical job.
Where it works and where it does not
- It works when the pull runs almost parallel to the rope or pole it grips.
- It fails when the tension pulls away from the main line. The knot can then slip.
- It can slip on modern line. The Animated Knots description notes that some modern lines, such as Spectra, Dyneema and polypropylene, may not hold it at all.
- It may not hold on metal. Sailing-magazine testing found that it often slips on more slippery modern line, and that it may not hold well on wire or stainless steel tube.
How to tie a rolling hitch
This is the rope version, with the tucked turn.
- First turn. Take the working end around the main line, making a turn that crosses over the standing part.
- Second turn, tucked. Make a second turn beside the first, and tuck it under the first turn. The tuck gives the knot its structure.
- Final half hitch. Pass the working end around the main line once more, on the side toward the load, and pull it snug.
- Set it. Pull the knot tight so the turns sit close together. Then load the line gently to seat it.
Check that the second turn is tucked under the first. Without the tuck, the first turns can slide along the line.
The pole version
To grip a pole or a bar, tie the same wraps without the tuck. The turns lie side by side. The pole version grips well on a pole, but it is less secure on rope than the tucked version.
Tying and adjusting under load
A rolling hitch can be tied and adjusted with load on the line, which is one reason it is useful for trimming tension. Do this with care. Keep your hands away from the knot, and make small changes.
Backing it up
Where the job matters, some authorities recommend tying a second rolling hitch with the tail end to back up the first. Check the backup under load before you rely on it.
Uses on boats and at home
- On boats: a rolling hitch can take the strain off a line. It is also used in a midshipman’s hitch for spring lines.
- At home: it makes an adjustable clothesline hitch, so you can tighten a line without retying it.
Common mistakes
- Skipping the tuck. Without it, the first turns have no structure and can slide.
- A pull that goes off line. Keep the load in line with the main rope or pole.
- Using it as a sole hold for a critical load. Back it up, and check it often.
Safety note
Do not rely on a rolling hitch for life-safety tasks, climbing or lifting people. Test it under a gentle load, check that the pull is in line, and back it up for anything important. Keep your hands clear of a loaded line.