Rope knots fall into four families based on what they do. Stopper knots keep a rope end from slipping through a hole. Loop knots form a fixed loop. Hitches attach a rope to an object. Bends join two ropes. Most everyday knots belong to one of these families, so learning the families helps you choose a knot and identify one.
Stopper knots
Stopper knots are tied at the end of a rope to stop it slipping through a hole, a pulley, or a grommet. The overhand is the simplest. The figure-eight is bulkier, easier to inspect, and easier to untie after a load. For steps, see our overhand knot guide.
Loop knots
Loop knots create a fixed loop that does not slide or shrink. The bowline makes a loop at the end of a rope. The figure-eight on a bight makes a loop in the middle of a rope. The alpine butterfly also makes a loop in the middle, and it can take a load from more than one direction.
Hitches
Hitches attach a rope to an object or to another rope, and they depend on that object to keep their shape. Examples include:
- Clove hitch. A quick tie-off to a post, rail, or spar.
- Two half hitches. A tie-off to a ring or post. See our half hitch guide.
- Taut-line hitch. An adjustable hitch for tension on a guy line.
- Trucker’s hitch. A hitch used to cinch down a load.
- Prusik. A friction hitch that grips under load and slides when unloaded. It is used in climbing and rescue, where training matters.
Bends
Bends join two ropes together.
- Sheet bend. Joins two ropes of different thickness.
- Square knot. Joins two ropes of equal thickness for light tasks. It can slip or spill under load.
- Double fisherman’s knot. Joins two stiff or smooth lines. It is very secure, but it is hard to untie after it has been loaded.
Binding and decorative knots
Binding knots constrict an object or hold things together. The constrictor is one example, and it is very hard to untie once it is pulled tight. Decorative knots, such as the Turk’s head, are tied mainly for appearance, although many of them also have practical roots.
Which family do you need?
- To keep a rope end from slipping: a stopper.
- To make a fixed loop: a loop knot.
- To tie a rope to a post, ring, or pole: a hitch.
- To join two ropes: a bend.
For the full set of common knots in one table, see our types of knots reference. For a sensible first set to learn, see best knots to learn.
Safety
Knots that carry people, climbing loads, or heavy cargo need training and checking. Learn them from a qualified instructor, and do not rely on a diagram alone.
Frequently asked questions
How many rope knots are there?
Hundreds have names, but most people only need a dozen or so. Most of the others are variations of the same few families.