A half hitch is a single turn of the working end around an object or around the standing part, pulled through a loop. It is a building block for many knots, including the clove hitch, but a single half hitch slips. For a secure hitch, tie two half hitches one after another. For heavier loads, take a round turn around the object first.
How to tie two half hitches
- Pass the working end around the post, ring, or pole.
- Bring the working end around the standing part, so it forms a loop, and then pass the working end through that loop. This is the first half hitch.
- Repeat step 2 right beside the first hitch, in the same direction, to make the second half hitch.
- Pull both hitches tight against the object.
The second hitch locks the first one in place. This is why a single half hitch on its own is not enough.
Round turn and two half hitches
A round turn is two full passes of the rope around the object. Take the round turn first, then tie the two half hitches as above. The round turn takes most of the strain, and the half hitches lock the line in place. Use it for heavier loads and for lines that carry steady tension, such as lines on a boat.
When to use each version
- Single half hitch. Quick and light, and only for temporary use. Do not rely on it alone for anything that matters.
- Two half hitches. A firm tie-off to a post, ring, or rail, for moderate loads.
- Round turn and two half hitches. Heavier loads, or a line that will carry strain for a long time.
- Slipped half hitch. A quick release that you can undo fast. It is not secure. For more on quick releases, see our easiest knots to untie guide.
Mistakes to avoid
- Trusting one half hitch. Always tie a second one beside it.
- Tying the second hitch the other way. Both should go in the same direction.
- Leaving the hitches loose. Pull both tight against the object so they sit snugly.
Safety
A single half hitch is not safe for loads that matter. For anything that holds a person, a climbing load, or heavy cargo, use knots and methods taught in a course, and check them before use. Our rope knot types guide explains how hitches fit into the wider set of knot families.
Frequently asked questions
Why does a single half hitch slip?
Nothing locks the loop in place, so the rope can work loose under a changing load. A second half hitch beside the first holds the first one in place.
Is a half hitch the same as a hitch?
No. A hitch is a family of knots that attach a rope to an object. A half hitch is one of the basic parts used to build hitches. In macramé, the half hitch is also a core decorative knot; see macramé knots. The types of knots reference groups the common hitches together.