Decorative Knots

Net Making: Knots and Steps for Tying a Net

Learn the sheet bend netting knot and the diamond mesh method for tying a net, with the tools you need, knot choices for each job and local rules.

On this page
  1. Quick answer
  2. Tools
  3. The sheet bend, step by step
  4. Choose a knot for the job
  5. Tie a simple diamond mesh
  6. Keep the mesh even and finish the edges
  7. Check local rules before using a net

Quick answer

Traditional net making uses the sheet bend, also called the netting knot. You tie it over a mesh gauge with a netting needle, which keeps every opening the same size. For a simple diamond-mesh net in paracord or twine, overhand or cow-hitch knots work too. Check local rules before you use a net for fishing.

Tools

  • Netting needle: a flat shuttle that holds the twine
  • Mesh gauge: a flat stick or card that sets the size of each opening
  • Twine or cord suited to the net’s job
  • A frame or top line to attach the net to

The sheet bend, step by step

The sheet bend is worked over the gauge with the needle, one knot at a time along each row.

  1. Set the gauge to the mesh size you want, and loop the twine around the gauge.
  2. Pick up the loop from the previous row with the needle.
  3. Throw a working loop over your hand, and pass the twine through it.
  4. Pinch the knot as you pull it tight, so it does not slip.
  5. Repeat along the row, checking that each opening matches the gauge.

Choose a knot for the job

  • Traditional fishing nets: the sheet bend. A double or extra-tuck version is more secure for fine or slippery twine.
  • Lace netting knot: a stronger option that locks the knot in place, so it resists unravelling.
  • Cargo nets and paracord meshes: other knots are often used, such as crown knots, a modified snake knot (bull hitch) or square knots.

For any net that will carry people or heavy loads, use a knot and material rated for the job, and check the design with someone experienced before you rely on it.

Tie a simple diamond mesh

This is the easiest way to make a small net with paracord or twine.

  1. Set a top line, which is a sturdy horizontal cord or rope.
  2. Cut the vertical strands to an even length. Each strand folds in half when you attach it, so allow for that. Attach them to the top line with cow hitches or lark’s head knots.
  3. Tie the first row. Take the right strand from one pair and the left strand from the next pair. Measure the mesh size down from the top line, then tie them with an overhand knot or a sheet bend.
  4. Repeat across the row, then turn and work back.
  5. Keep the spacing even. Use a spacer card or your fingers to check each opening before you pull a knot tight.
  6. Finish the bottom by tying the remaining single strands to a bottom line. Trim the ends, and melt synthetic ends.

Keep the mesh even and finish the edges

An even mesh is what makes a net look and work well. Check the opening size with the gauge every few rows. Finish the edges with a border line, and secure the corners so they hold their shape.

Check local rules before using a net

Many places regulate fishing nets. Rules can cover where you may use a net, which mesh sizes are allowed and which types of net are legal. Check your local fishing or wildlife rules before you use a net.

For the fishing-net project itself, see how can I make a DIY fishing net?. For other mesh-like knots, see the macramé knots guide. For an overview of knot crafts, see decorative knots and knot tying crafts.

The complete guide to decorative knots

Decorative Knots and Knot Tying Crafts: Paracord and Rope Projects
Read the guide

Keep exploring

Guides from other topics

All topics →