Decorative Knots

Turk's Head Knot: How to Weave a Decorative Band

Learn how a Turk's head knot is built: what leads and bights mean, the cord and core you need, how to work a simple band and how to finish it neatly.

On this page
  1. What a Turk’s head knot is
  2. Leads and bights
  3. Materials and core
  4. Tie a simple band
  5. Finish and size the band
  6. Where Turk’s head bands are used

What a Turk’s head knot is

A Turk’s head is a woven band worked around a core. It is decorative, and it is often used on handles, rings, knife grips and neckwear. The pattern comes from one or more cords that pass around the core in a repeating path.

Leads and bights

Turk’s heads are described by two numbers:

  • Leads are the number of cord parts that run side by side around the band.
  • Bights are the number of loops the band makes around its circumference.

A “3-lead, 4-bight” Turk’s head, for example, has three parts running side by side and four loops around the core. Count the leads and bights on a sample before you start a project, so you know the pattern you are making.

Materials and core

  • Cord: Nylon paracord or a thin rope that holds its shape.
  • Core: A rope, a dowel, a ring or a handle. The core sets the inside size of the band. For a handle, the handle itself is the core.
  • Tape or a clip to hold the start in place while you work.
  • Scissors and a lighter for sealing nylon ends.

Tie a simple band

A Turk’s head follows a specific over-under path, and the path depends on the number of leads and bights. Use a diagram for the count you chose. For a first attempt, pick a small count and work it on a short sample of core.

  1. Tape the start of the cord to the core, and lay the working parts around it.
  2. Work the first trip around the core, keeping the parts flat and evenly spaced.
  3. Follow the over-under path from your diagram for each trip.
  4. Check each trip before you go on. A crossed part shows up quickly and is easier to fix early.
  5. Tighten the band gradually as it forms, pulling each part snug without twisting the core.
  6. When the pattern closes up, finish the ends as described below.

Mark each bight with a small piece of tape while you work. That makes it easier to see when the pattern repeats.

Finish and size the band

Work a test band on a short piece of core before you commit to a long one. The band should sit snugly without forcing the core out of shape.

To finish, tuck the ends under the band with a needle or a tapered tool, trim the tails, and melt nylon ends with a lighter. Press the melted tips flat against the band so they do not fray.

Where Turk’s head bands are used

Turk’s heads are common on tool handles and knife grips, where the band adds grip and looks neat. They are also used on rings, on neckwear and as a finish on lanyard ends. For a related braided band, see the sennit braid guide. For a lanyard finish, see the lanyard knot guide.

For an overview of knot crafts, see decorative knots and knot tying crafts.

The complete guide to decorative knots

Decorative Knots and Knot Tying Crafts: Paracord and Rope Projects
Read the guide

Keep exploring

Guides from other topics

All topics →