Camping Knots

Tree-Friendly Knots: How to Tie Off to a Tree Without Harm

Tie off to a tree without damaging it. Use wide straps, a round turn with two half hitches, and leave the bark unpinched. Remove straps when you leave.

On this page
  1. The short answer
  2. Why bark matters
  3. Choose the right material
  4. Choose the right tree
  5. Tie off with a round turn and two half hitches
  6. Attach the line with a bowline
  7. Leave no trace
  8. When to skip the tree

The short answer

Use a wide, flat strap rather than thin rope. Wrap it around the trunk once, finish with a round turn and two half hitches, and keep it snug without cinching it into the bark. Remove the strap when you leave.

Why bark matters

The inner bark carries food from the leaves down to the roots. A ring of damage all the way around the trunk, called girdling, can kill a tree or the limb above it. Thin cord and wire cut into bark more easily than a wide strap does.

Choose the right material

  • Wide tree straps or flat webbing. Spreading the load over more bark reduces damage.
  • Avoid wire, chain, and thin cord on the trunk.
  • Do not nail, staple, or screw into a tree.

Choose the right tree

  • Pick a healthy, mature tree with a trunk wide enough that the strap will not cinch the bark.
  • Avoid dead, cracked, or fungus-affected trees. They may not hold a load.
  • Avoid young saplings, which a strap can girdle as they grow.

Tie off with a round turn and two half hitches

  1. Wrap the strap around the trunk once. Keep it flat, and do not let it overlap itself.
  2. Bring the working end around the standing part of the line, and tie a half hitch.
  3. Tie a second half hitch next to the first.
  4. Pull snug. Do not cinch it so hard that it pinches the bark.

If you may need to change the tension later, use a taut-line hitch in place of the second half hitch. It slides, so you can adjust it.

Attach the line with a bowline

If you tie your line to the strap, finish the line’s end with a bowline. It forms a loop that does not slip. The survival knots guide has the steps.

Leave no trace

  • Remove straps and cord when you leave, so the tree is left as you found it.
  • Check the bark after each trip for rubbing or marks. Loosen any strap that has dug in.
  • Follow park rules. Some places limit what you can tie to trees.

When to skip the tree

Choose another anchor if the tree looks dead, cracked, or unstable, or if local rules do not allow tying to trees. For the anchors used by specific camp tasks, see hammock knots, tarp knots, and the bear bag hang.

The complete guide to camping knots

Camping Knots: Essential Knots for Tents and Campsites
Read the guide

Keep exploring

Guides from other topics

All topics →