The short answer
Use a square lashing. Start with a clove hitch around one stick. Wrap the cord around both sticks three or four times. Add three or four tight frapping turns between the sticks. Finish with a clove hitch or two half hitches.
What you need
- Two straight, dry sticks of similar thickness, with any loose bark removed.
- Plenty of cord, strong enough for the load. A lashing uses more cord than you expect, so start with more than you think you need.
- A helper or a steady hold. Holding the sticks at a right angle while you wrap is easier with two people.
Steps
- Start with a clove hitch. Tie a clove hitch around the upright stick, just below where the cross stick will sit. Tuck the tail under the wraps.
- Wrap the joint. Lay the cross stick across the upright. Pass the cord over the cross stick, behind the upright, under the cross stick, and in front of the upright. Repeat three to four times, keeping each wrap snug beside the last.
- Add frapping turns. Wrap the cord tightly between the two sticks, around the crossing, to squeeze the wraps together. Make three to four frapping turns.
- Finish. Tie a clove hitch or two half hitches around one of the sticks, and pull tight.
Tips
- Keep the wraps side by side. Wraps that cross over each other are weaker.
- Frapping does the tightening. Pull each frapping turn as hard as you can. The frapping turns are what lock the joint.
- Keep the sticks at a right angle while you work. Animated Knots notes that a square lashing can also work at smaller angles, down to about 45 degrees, but a true right angle is best.
Quick option
For a light, short-term joint, a transom lashing can be tied faster. It is a quick, temporary fix. For anything that carries weight or has to stay up for a long time, use the square lashing.
Related reading
- Lashing knots covers square, diagonal, and other lashings.
- Clove hitch explains the starting hitch in more detail.
- Survival knots covers the other knots most campers should know.