Sooner or later you need to join two lines: a leader to a main line, two pieces of mono, or braid to a leader. The right knot depends on the material, how different the two diameters are, and whether the connection has to pass through rod guides. This guide covers the main options and how to choose between them. For joining two ropes rather than fishing line, see the sheet bend.
The short answer
For most anglers, the double uni is the easiest reliable choice. For braid to a leader where a slim profile matters most, the FG knot is the usual pick. The Albright and Alberto handle lines of different thickness well, and the blood knot is best for lines of similar thickness.
Quick comparison
| Knot | Best for | Profile | Learning curve |
|---|---|---|---|
| Double uni | Most line-to-line joins, including braid to leader | Bulkier | Gentle |
| FG | Braid to leader, slim and strong | Slimmest | Steep |
| Albright | Lines of very different thickness | Medium | Moderate |
| Alberto | Braid to fluorocarbon, slim connection | Slim | Moderate |
| Blood knot | Mono to mono, or lines of similar thickness | Medium | Moderate |
Joining lines of similar thickness
When both lines are close in diameter, a blood knot or a double uni works well. The blood knot is traditionally used to join two pieces of monofilament. It works best when the lines are close in size, because the coils have to grip evenly on both sides. The surgeon’s knot is another quick option, common for joining a leader to a tippet.
The double uni also suits lines of similar size. You tie a uni knot on each line around the other, then slide the two knots together. For steps, see braid to leader knots.
Joining lines of different thickness
Different diameters are the hard case. The Albright and Alberto are built around a loop or a tapered wrap that lets a thinner line grip a thicker one. The Albright is a quick option, and the Alberto is slimmer.
The double uni also handles different sizes, though it works best when the difference is moderate and you give the thinner line extra wraps.
If your question is specifically about unequal diameters, see the best knot for joining two lines of unequal diameter.
Braid to leader and mono to mono
Joining braid to a leader is a special case because braid is slick and thin. Extra wraps help the knot hold, and the FG is often preferred for a slim profile. For a full breakdown, see the braid to leader knots guide.
Mono to mono is simpler. A blood knot or double uni on lines of similar thickness is usually enough.
How to choose
Ask three questions:
- How different are the diameters? Similar sizes suit the blood knot or double uni. Very different sizes suit the Albright or Alberto.
- What material is each line? Braid is the slickest, so it needs more wraps or a specific braid knot. Mono and fluorocarbon are easier to grip.
- Will the knot pass through rod guides? If it will, favor the slim knots such as the FG or Alberto. If you are casting in a heavy cover, a bulkier knot may be fine.
Test your join
Before you rely on a join, test it:
- Wet the knot before you cinch it.
- Pull the two main lines in opposite directions so the knot seats fully.
- Give the finished knot a firm tug. If anything slides or the wraps shift, retie it.
- Trim the tag ends close, but leave a small tail.
For the wider picture of braid knots, read fishing knots for braided line.