The Miller’s knot, also called the sack knot or bag knot, is a binding knot for closing the neck of a sack, bag or similar cylindrical object. It is a classic choice for grain and feed sacks and for fabric bags. It grips the neck well, and you can tie it quickly with a length of cord.
How to tie a Miller’s knot
- Gather the neck of the sack, then wrap the cord around it once, passing around the back.
- Bring the working end across the front to form an X over the standing part.
- Take a second turn around the neck, lying beside the first turn or overlapping it slightly.
- Tuck the working end under the turns to lock the knot in place.
- Pull the working end and the standing part firmly in opposite directions to tighten the knot around the neck.
Before you tighten, check that the working end is tucked under the turns and not lying on top of them. Then pull both ends evenly.
A quick-release version
For a closure you can undo quickly, tie the final tuck with a loop (a bight) instead of the working end. To open the bag, pull the loop free.
A loop-based closure is quicker to undo, but it can also loosen if the bag is jostled or loaded. Use it for light work, and test it before you rely on it.
What it is good for
- Closing a grain, feed or cloth sack at the neck, where a simple drawstring is not available.
- Closing a fabric bag with cord, for camp or workshop use.
- Binding the end of a cylindrical bundle, where you need a neck that stays closed.
Standard and modified versions
Some references describe a modified version of the Miller’s knot, with a different tuck or finish. This guide covers the standard tie. Before you copy a tie for a job, check which version a diagram shows.
If you came here looking for the surgeon’s knot, see how to tie a surgeon’s knot. It is a different knot used for joining lines.
Common mistakes
- Too few turns. Two clean wraps are the minimum. Loose turns will not keep the neck closed.
- Not tucking the end. The tuck is what locks the knot.
- Tightening one end only. Pull the working end and the standing part evenly.
- Using slippery cord. Smooth synthetic cord can slide. Choose a cord with some grip.
Related knots
- For a strong grip on round items, see the constrictor knot.
- For bundles of sticks or firewood, see the bundling knot.
Safety note
Sacks and bags can get heavy, and a closure can fail under sudden weight. Do not use a Miller’s knot to lift or carry anything where a failure could injure someone. Test the closure before you move the load.