Rope and Ropework

What did Native Americans make rope out of?

Many Indigenous peoples in North America made rope from plant fibers like dogbane, cedar bark and yucca, plus sinew and rawhide. Materials varied by region.

On this page
  1. Short answer
  2. Why there is no single answer
  3. Plant fibers from bark
  4. Plant fibers from stalks and leaves
  5. Animal materials
  6. How plant fibers became cordage
  7. A note on “Indian hemp”
  8. What changed after European contact
  9. Where to learn more

Short answer

Many Indigenous peoples in North America made rope from plant fibers, such as dogbane, milkweed, the inner bark of trees like cedar and basswood, and yucca and agave fibers in the Southwest. Some also used animal materials, such as sinew (tendon) and rawhide, for binding and lashing. The materials varied widely by region, by season and by the purpose of the rope.

Why there is no single answer

“Native Americans” covers hundreds of distinct nations, with different languages, homelands, environments and crafts. A rope made on the Northwest Coast from cedar bark might look and behave very differently from one made in the desert Southwest from yucca. Any single list would leave out most of the picture. The best answer is a set of regional examples, with the plants that were used in each area.

Plant fibers from bark

Inner bark, also called bast, was an important source of cordage across much of the continent.

  • Cedar bark was used in the Pacific Northwest for rope, along with other woven goods.
  • Basswood and linden bark came from the inner bark of trees in the eastern woodlands, and was processed into strands.
  • Elm bark was also used in parts of the East, from the inner bark of young branches.

Bark was usually taken in spring or early summer, when the bark separates easily from the wood.

Plant fibers from stalks and leaves

  • Dogbane (Apocynum cannabinum) made strong, fine fibers, and many peoples used it over a wide area.
  • Milkweed also produced long, strong fibers, though its sap can be irritating and some parts are toxic. Handle it with care.
  • Cattail leaves were shredded and twisted into cordage in wetland areas.
  • Yucca and agave fibers were used in the Southwest for cordage, nets and sandals.
  • Stinging nettle fiber was used for cordage in some regions.
  • Spanish moss was used by Native peoples around the Gulf of Mexico for cordage, though its fibers need careful processing.

Animal materials

  • Sinew, the tendon from large animals, was used for sewing, binding and bowstrings.
  • Rawhide, dried and cut into strips, was used for lashing and some kinds of rope.

These animal materials were often used alongside plant fibers, depending on what was needed.

How plant fibers became cordage

Plant fiber rope takes work. The usual steps were:

  1. Harvesting the plant at the right time, when the fiber is strong and easy to separate.
  2. Retting, which means soaking or leaving the stalks or bark to partly rot, so the soft tissue breaks down and the fibers can be separated.
  3. Stripping or splitting the bark or stalk to free the fibers.
  4. Drying the fibers, then working them into strands.
  5. Twisting the strands together, often in several steps, to make a cord or rope.

Each step depends on the plant and the local practice. Methods differed between nations and between individual makers.

A note on “Indian hemp”

Dogbane is sometimes called “Indian hemp,” but it is not related to hemp (Cannabis sativa). The name was applied by non-Native observers to a plant used widely for fiber. Today it is more accurate to call it dogbane, and to name the Indigenous nations whose practices you are learning about.

What changed after European contact

After European colonists arrived, new fibers were introduced. Hemp and flax came with the colonists, and over time cotton and imported fibers became more common. Some traditional plant materials were replaced, and others continued in use. Dates and details vary by place, so check a regional source before you state a specific change.

Where to learn more

For accurate detail on a specific nation, region or plant, look for work by Indigenous authors and cultural centers, and for museum collections that include cordage. Ethnobotany references are useful for plant names and processing. Be wary of general summaries that treat all Native peoples as one.

For the broader history of rope materials, see types of natural fiber rope and how to choose one. For how the plant fibers used today compare, see jute vs sisal vs manila rope.

The complete guide to rope and ropework

Types of Natural Fiber Rope and How to Choose One
Read the guide

Keep exploring

Guides from other topics

All topics →